Cr3+ doping ruby sapphire crystal for watch glass optical winows
laser OR
Highly frequency Ti+ doped (Titanium doped)sapphire single crstal
used in laser/Ti Al2O3 Crystal for laser machine,Titanium doped
Sapphire,color sapphire crystal glass lens,s,Ruby optical
glass,Titanium sapphire optical lens,Titanium sapphire laser
crystals,ruby glass ball
Application
It is similar with Ti+ doping sapphire crystal.
Ti: sapphire (Titanium doped Sapphire, Al2O3:Ti3+) is used for
making ultra-short pulse solid-state or wavelength tunable lasers.
Ti:sapphire lasers are also very convenient e.g. for pumping test
setups of new solid-state lasers (e.g. based on neodymium or
ytterbium-doped gain media), since they can easily be tuned to the
required pump wavelength and allow one to work with very high pump
brightness due to their good beam quality and high output power of
typically several watts.
Scitlion is able to offer
Ti2O3 dopand concentration from 0.06% to 0.26% (atm%)
Rod diameter from 2mm to 100mm
Length from 0.1mm to 100mm
Coating upon your request
| Ø Best materials for ultrashort pulse generation |
| Ø Tunable range from 600-1100nm |
| Ø High gain |
| Ø Could be pumped by short pulse flash lamps |
| Ø Good physical and optical properties |
Main Specifications
| Polishing Specification for Laser Grade |
| Orientation Tolerence | <0.5° |
| Thickness/Diameter Tolerance | ±0.05 mm |
| Parallel | 10" |
| Perpendicular | 5' |
| surface Quality | 10/5 |
| Wavefront Distortion | λ/4@632nm |
| Surface Flatness | λ/8@632nm |
| Clear Aperture | >90% |
| Chamfer | <0.2×45° |
| Maximum dimensions | dia 120mm |
Material characteristics
| Materials | Ti:Sapphire |
| Nd Concentration tolerance (wt%) | 0.05-0.35wt% Ti2O3 |
| Orientation | A-Axis within 5° E-vector parallel to C-Axis |
| End Configuration | flat/flat or Brewster/Brewster ends |
| Absorption Coefficence | 0.5~6.0cm-1 |
| Figure of Merit | 100~300 |
| Coatings | Standard coating is BBAR with R < 5.0% each face at 532 nm and R
< 0.5% each face, 650 nm to 850 nm. Other coatings available |
Q1: Can I have samples to test?
A: Yes,we are pleased to supply samples to test and check
quality,mixed sample order is available.
Q2: Do you have any MOQ limited? A: Our MOQ: 3pcs Q3: What’s the
lead time?
A: Sample :2-7 days.Mass production: 15-20 days.
Q4:How do you ship the goods and how long does it take?
A: We usually ship goods by UPS,FEDEX,TNT. It usually takes 3-5
days to arrive.
Q5: Do you offer guarantee for your products?
A: After test them if not pass test,you can return the goods at any
time, we will re-offer you again and also bear shipping fee.
Q6: Do you accept OEM?
A: We have our own brand-metalaser. OEM is also acceptable.
